Switch to systemd-boot and Unified Kernel Image on Fedora

I am not responsible for bricked computers, system instabilities,dead cats, thermonuclear war or you getting fired because you lostimportant work.

Please make a backup of your device or of the data, and make a bootdrive in case of necessity. Do some research if you have any concernsabout steps documented in this guide.

YOU are choosing to make these modifications, and if you point thefinger at me for messing up your device, I will laugh at you.

Why are you doing this kind of wried thing?

Ok... Since I want to sign secure boot on my own, without breaking Fedora's current multi-kernel behavior. Luckily that kernel-install.d provides enough power to customize kernel install process.

Switch to Systemd-Boot (from Grub+Shim)

ENSURE YOU ARE ON UEFI BEFORE DOING THIS.

It is basically same as kowalski7cc's article with minor modifications to make it work with Unified Kernel Image

Move efi mount point

You may want to check if modifications to /etc/fstab is sanity.

1
2
sudo mkdir /efi
sudo sed -i "s|/boot/efi|/efi|g" /etc/fstab
Now remount efi:
1
2
sudo umount /boot/efi
sudo mount /efi

Install systemd-boot

You may want to backup files at /boot/efi and /boot before this.

1
2
3
4
5
6
sudo mkdir /efi/$(cat /etc/machine-id)
sudo rm /etc/dnf/protected.d/grub* /etc/dnf/protected.d/shim* # needed in some cases, if next command won't run.
# in case following command fails, delete /etc/dnf/protected.d/grub* and /etc/dnf/protected.d/shim*
sudo dnf remove grubby grub2\* shim\* memtest86\ && sudo rm -rf /boot/grub2 && sudo rm -rf /boot/loader
cat /proc/cmdline | cut -d ' ' -f 2- | sudo tee /etc/kernel/cmdline
sudo bootctl install
And you may umount /boot and remove its fstab entry now since it will no longer be used.

DO NOT REBOOT UNTIL I TOLD YOU THAT YOU CAN.

Change kernel-install scripts to enable Unified Kernel Image

Disable old initrd generation

Do following:

1
sudo ln -s /dev/null /etc/kernel/install.d/50-dracut.install
to disable default initrd generation and installation, we are going to move this work in other scripts.

Change installation of kernel image

Create file at /etc/kernel/install.d/90-loaderentry.install with contents here, and remember to set +x permission to the file.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
#!/usr/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# SPDX-License-Identifier: LGPL-2.1-or-later
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
#
# systemd is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with systemd; If not, see <http://www.gnu.org/licenses/>.

COMMAND="$1"
KERNEL_VERSION="$2"
ENTRY_DIR_ABS="$3"
KERNEL_IMAGE="$4"
INITRD_OPTIONS_START="5"

MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID

BOOT_ROOT=${ENTRY_DIR_ABS%/$MACHINE_ID/$KERNEL_VERSION}
BOOT_MNT=$(stat -c %m $BOOT_ROOT)
ENTRY_DIR=${ENTRY_DIR_ABS#$BOOT_MNT}

if [[ $COMMAND == remove ]]; then
rm -f "$BOOT_ROOT/loader/entries/$MACHINE_ID-$KERNEL_VERSION.conf"
rm -f "$BOOT_ROOT/loader/entries/$MACHINE_ID-$KERNEL_VERSION+"*".conf"
rm -f "$BOOT_ROOT/EFI/Linux/$KERNEL_VERSION-$MACHINE_ID.efi"
rm -f "$BOOT_ROOT/EFI/Linux/$KERNEL_VERSION-$MACHINE_ID+"*".efi"
exit 0
fi

if ! [[ $COMMAND == add ]]; then
exit 1
fi

if ! [[ $KERNEL_IMAGE ]]; then
exit 1
fi

if [[ -f /etc/os-release ]]; then
. /etc/os-release
elif [[ -f /usr/lib/os-release ]]; then
. /usr/lib/os-release
fi

if ! [[ $PRETTY_NAME ]]; then
PRETTY_NAME="Linux $KERNEL_VERSION"
fi

if [[ -f /etc/kernel/cmdline ]]; then
read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
elif [[ -f /usr/lib/kernel/cmdline ]]; then
read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
else
declare -a BOOT_OPTIONS

read -r -d '' -a line < /proc/cmdline
for i in "${line[@]}"; do
[[ "${i#initrd=*}" != "$i" ]] && continue
[[ "${i#BOOT_IMAGE=*}" != "$i" ]] && continue
BOOT_OPTIONS+=("$i")
done
fi

if [[ -f /etc/kernel/tries ]]; then
read -r TRIES </etc/kernel/tries
if ! [[ "$TRIES" =~ ^[0-9]+$ ]] ; then
echo "/etc/kernel/tries does not contain an integer." >&2
exit 1
fi
LOADER_ENTRY="$BOOT_ROOT/EFI/Linux/$KERNEL_VERSION-$MACHINE_ID+$TRIES.efi"
else
LOADER_ENTRY="$BOOT_ROOT/EFI/Linux/$KERNEL_VERSION-$MACHINE_ID.efi"
fi

mkdir -p "${LOADER_ENTRY%/*}" || {
echo "Could not create loader entry directory '${LOADER_ENTRY%/*}'." >&2
exit 1
}

[ "$KERNEL_INSTALL_VERBOSE" -gt 0 ] && \
echo "Creating $LOADER_ENTRY"
{
unset noimageifnotneeded
for ((i=0; i < "${#BOOT_OPTIONS[@]}"; i++)); do
# shellcheck disable=SC1001
if [[ ${BOOT_OPTIONS[$i]} == root\=PARTUUID\=* ]]; then
noimageifnotneeded="yes"
break
fi
done
dracut --kernel-cmdline "${BOOT_OPTIONS[*]}" -f ${noimageifnotneeded:+--noimageifnotneeded} --uefi "$LOADER_ENTRY" "$KERNEL_VERSION"
}
exit 0

The dracut --kernel-cmdline "${BOOT_OPTIONS[*]}" -f ${noimageifnotneeded:+--noimageifnotneeded} --uefi "$LOADER_ENTRY" "$KERNEL_VERSION" does the magic to enable Unified Kernel Image.

Change generation of rescue image

Create file at /etc/kernel/install.d/51-dracut-rescue.install with contents here, this is for building rescue entry in unified way. Also, set +x permission here.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
#!/usr/bin/bash

export LANG=C

COMMAND="$1"
KERNEL_VERSION="$2"
ENTRY_DIR_ABS="$3"
KERNEL_IMAGE="$4"


dropindirs_sort()
{
suffix=$1; shift
args=("$@")
files=$(
while (( $# > 0 )); do
for i in "${1}"/*"${suffix}"; do
[[ -f $i ]] && echo "${i##*/}"
done
shift
done | sort -Vu
)

for f in $files; do
for d in "${args[@]}"; do
if [[ -f "$d/$f" ]]; then
echo "$d/$f"
continue 2
fi
done
done
}

[[ -f /etc/os-release ]] && . /etc/os-release

if [[ ${KERNEL_INSTALL_MACHINE_ID+x} ]]; then
MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
elif [[ -f /etc/machine-id ]] ; then
read -r MACHINE_ID < /etc/machine-id
fi

if ! [[ $MACHINE_ID ]]; then
exit 0
fi

if [[ -f /etc/kernel/cmdline ]]; then
read -r -d '' -a BOOT_OPTIONS < /etc/kernel/cmdline
elif [[ -f /usr/lib/kernel/cmdline ]]; then
read -r -d '' -a BOOT_OPTIONS < /usr/lib/kernel/cmdline
else
declare -a BOOT_OPTIONS

read -r -d '' -a line < /proc/cmdline
for i in "${line[@]}"; do
[[ "${i#initrd=*}" != "$i" ]] && continue
BOOT_OPTIONS+=("$i")
done
fi
BOOT_ROOT=${ENTRY_DIR_ABS%/$MACHINE_ID/$KERNEL_VERSION}
LOADER_ENTRY="$BOOT_ROOT/EFI/Linux/0-rescue-$MACHINE_ID.efi"
BOOT_DIR_ABS="$BOOT_ROOT/EFI/Linux"
ret=0

case "$COMMAND" in
add)
[[ -f "$LOADER_ENTRY" ]] && exit 0

# source our config dir
for f in $(dropindirs_sort ".conf" "/etc/dracut.conf.d" "/usr/lib/dracut/dracut.conf.d"); do
if [[ -e $f ]]; then
# shellcheck disable=SC1090
. "$f"
fi
done

# shellcheck disable=SC2154
[[ $dracut_rescue_image != "yes" ]] && exit 0

[[ -d "$BOOT_DIR_ABS" ]] || mkdir -p "$BOOT_DIR_ABS"

dracut --kernel-cmdline "${BOOT_OPTIONS[*]}" -f --no-hostonly -a "rescue" --uefi "$LOADER_ENTRY" "$KERNEL_VERSION"

((ret+=$?))
;;

remove)
exit 0
;;

*)
usage
ret=1;;
esac

exit $ret

Reinstall kernel-core

Reinstall your kernel image to make changes apply:

1
2
sudo dnf install binutils # needed by dracut to build kernel image
sudo dnf reinstall $(rpm -qa|grep kernel-core)

You should be able to see several .efi kernel image at /efi/EFI/Linux, if it's not there, rollback with your backup. Now you can reboot to see if everything works.

Update systemd-boot on demand

Install plugins to run scripts for dnf:

1
python3-dnf-plugin-post-transaction-actions

Create file /etc/dnf/plugins/post-transaction-actions.d/systemd-udev.action

1
systemd-udev:in:bootctl update
This will enable systemd-boot in efi to update along with systemd package.


Switch to systemd-boot and Unified Kernel Image on Fedora
https://yanqiyu.info/2021/04/30/systemd-boot-and-unified-kernel-image/
作者
Karuboniru
发布于
2021年4月30日
许可协议